directional drilling Hanworth gives you a trenchless method to install new pipes, cables, ducts and pipelines without long open trenches. By guiding utilities underground from small entry and exit pits, CW Pipewise helps keep homes, businesses and London routes moving with far less disruption, impact, surface damage, noise and mess than traditional excavation. It is a practical choice where access is tight, surfaces are finished, or open digging would affect residents, customers, railways or passing traffic. Our team uses suitable HDD equipment for water pipe replacement and installation, new water pipe connections, MDPE pipework, electric cables, fibre optics, phone lines and ducting systems, with planning that takes account of existing buried services, including water, gas and power routes. Once the drill route is complete, we can also support reinstatement so the area is left neat, usable and ready for normal use again.
Directional drilling, often called HDD or horizontal directional drilling, is a controlled method for getting pipes, ducts and pipelines installed along a planned underground route. In Hanworth, we excavate a compact launch pit, drill a guided pilot hole beneath roads, driveways or gardens at the agreed line and depth, then enlarge the bore if the project requires it and pull the new pipe or ducting back through where you need it. Because the drill head can be steered over useful distances, CW Pipewise can plan curved routes, work around known buried utilities and reduce disruption to the surface and the surrounding environment. Before drilling, utility surveys and tracing can help identify pipes, cables, gas services and other underground utilities so the route is planned responsibly. This makes directional drilling Hanworth work especially useful for new water mains, water main pipe replacement, lead pipe replacement, multi utility installations and cable or fibre duct runs where keeping London access open matters. The result is a cleaner installation process with clear advantages: less excavation, less reinstatement and a more predictable route for the new service.
CW Pipewise operates compact, steerable mini drill rigs and specialist equipment for built up and space restricted areas across Hanworth and London. This horizontal directional drilling method is ideal when you need trenchless installation for water pipes, electric cables, fibre optics, phone lines, ducts, utility pipelines and wider pipes, cables and ducting systems. We can drill parallel bores beside roads and footpaths, install short undercrossings beneath streets, driveways, gardens, railways or small watercourses, and keep ground disturbance tightly controlled to reduce disruption and protect the working environment. For homes, directional drilling Hanworth services can support lead pipe replacement, MDPE pipework, new water pipe connections and upgrades to old lead, copper, steel or galvanized pipes. For commercial sites and civil projects, the same HDD approach can help with multi utility installations, cable moling related works, reinstatement and groundworks where open excavation would be awkward or disruptive. Because HDD works from small pits rather than large excavations, the follow on making good is usually simpler, cleaner and easier to manage.
CW Pipewise directional drilling is suitable for a wide range of projects in Hanworth and London, including:
Depending on local ground conditions, our London route planning, utility surveys and horizontal directional drilling works can carry short to medium length bores across suitable distances for service lines. For each project, CW Pipewise can combine route planning, utility tracing, moling and excavating experience, pipe installation and reinstatement, providing practical advantages where you need new pipes installed with less traffic disruption and a tidy finish.
We assess the route, existing buried services and surface constraints, then design the bore path and choose the most suitable rig set-up.
Small pits are excavated at the start and finish points (or to an intermediate pit if required). These are carefully positioned to minimise impact and allow safe rig operation.
The mini HDD rig drills a steerable pilot bore along the planned route. A locating system monitors the drill head position and depth, so the operator can continuously adjust to follow the design line and avoid existing utilities.
For larger pipes, reamers are pulled through the pilot bore to open it up to the right diameter, using drilling fluid to carry spoil away and stabilise the hole.
The new pipe, duct or cable protection is attached to the drill string and pulled smoothly back through the bore into its final position.
Once installed, the new service is connected, tested and commissioned. The launch and reception pits are reinstated to a high standard, leaving the surface neat and tidy.
Fill out the form below for a free quote on our expert services and one of our team will get back to you promptly with all the details.
0208 087 1030
